Products Synthetic Greases
Synthetic Greases
SPELUB SG/PT (5)
Synthetic in-organic thickener grease fortified with polymeric lubricants for low frictions and long term lubrication in medium to high temperature lubrication. Spelub SG/PT (5) is ideal for plastic to plastic and plastic to metal lubrication.
SPELUB SG/PT (10)
Same as SG/PT (5) but with higher solid lubricants. Spelub SG/PT (10) can handle heavy load and extreme pressures.
| Spelub SG/PT (5) | Spelub SG/PT (10) | |
| N.L.G.I. Grade | 2 | 2 |
| Penetration | 265 to 295 | |
| Appearance | White Beige | |
| Base Oil | Synthetic Oils | |
| Thickener | In-Organic | |
| Drop Point | None | |
| Operating Temp. | -20˚C to 250˚C | |
| Solid Lubricant | 5% | 10% |
SPELUB SS/NM-180
Non melt semi-synthetic oils base grease for wide temperature range. Spelub SS/NM-180 provides excellent lubrication with good low and high temperature properties. Spelub SS/NM-180 is ideal for wide temperature range.
SPELUB SG/NM-300
Fully synthetic non melt grease for high temperature, moderate loads and speeds. Spelub SG/NM-300 leaves low residue and provides a film of solid lubricants that protects part long after base oil has evaporated. Spelub SG/NM-300 also provides lubrication in very low temperature as well.
| Spelub SS/NM-180 | Spelub SG/NM-300 | |
| N.L.G.I. Grade | 2 | 2 |
| Penetration | 265 to 295 | |
| Appearance | Greyish - Black | |
| Base Oil | Semi-Synthetic | Synthetic |
| Thickener | In-Organic | |
| Drop Point | None | |
| Operating Temp. | -20˚C to 240˚C | -40˚C to 250˚C |
| Solid Lubricant | Present | |
SPELUB SG/G-10
For applications in high temperature zones like furnace, kiln & oven bearings. Spelub SG/G-10 has excellent thermal conductivity and good load carrying capacity that protects the lubricated parts from wear and tear.
| Spelub SG/G-10 | |
| N.L.G.I. Grade | 2 |
| Penetration | 265 to 295 |
| Appearance | Greyish - Black |
| Base Oil | Synthetic Oils |
| Thickener | In-Organic |
| Drop Point | None |
| Operating Temp. | -40˚C to 700˚C |
| Solid Lubricant | 10% |
SPELUB HSG-15
With adhesion properties and low viscosity base oils Spelub HSG-15 is ideal for high speed bearings, spindles and etc. Has good water resistance and forms a film that inhibit rust and wear with excellent lubrication properties.
| Spelub HSG-15 | |
| N.L.G.I. Grade | 2 |
| Penetration | 265 to 295 |
| Appearance | Creamish Yellow |
| Base Oil | Synthetic Oils |
| Thickener | Complex |
| Drop Point | > 240˚C |
| Operating Temp. | -40˚C to 160˚C |
SPELUB SG/Premium Series
With careful selections of base oil, thickener and additives Spelub SG/Premium greases can meet the requirement of most unique and demanding applications. Spelub SG/premium greases are available in various N.L.G.I. grade with base oil viscosity ranging from 30 CST to 400 CST. Typical applications like textile machineries, auto parts & auto ancillaries, bearing manufacturers & critical machineries.
| Spelub SG 30 | Spelub SG 46 | Spelub SG 150 | Spelub SG/PU 100 | |
| Base Oil Viscosity | 30 | 46 | 150 | 100 |
| Thickener | Complex | Complex | Complex | Poly-urea |
| Operating Temp. | -40˚C to 180˚C | -40˚C to 180˚C | -40˚C to 180˚C | -40˚C to 180˚C |
| Applications | Auto parts and assemblies like rear view mirrors, side view mirrors, windows, seat assemblies, starters, wiper motors, dampers, hydraulic doors, head light assemblies, clutch release bearings, thrust bearings, brake assemblies, indicators and other applications where frequent lubrication is not possible. | |||
SPELUB SG/RES Series
For lubrication of parts that are subjected to aggressive materials like acid, ammonia, high alkaline environments, polar and non-polar solvents or parts that are used in machinery that involve gases and other contaminants that degrade parts and machinery.